Contact-Tube-to-Working-Distance slopes with Gas-Metal-Arc-Welding

doi:doi:10.25835/0011019

You're currently viewing an old version of this dataset. To see the current version, click here.

Contact-Tube-to-Working-Distance slopes with Gas-Metal-Arc-Welding

Voltage and current signal during Gas-Metal-Arc-Welding. Measurement Data acquiered using National Instruments USB-6361. Current was converted using a "Chauvin Arnoux PAC22".
Welding power source: Carl Cloos GLC 303 PA/3
Welding torch: Abicor Binzel ROBO WH W 500
Welding speed: 0.3 m/min
Process gas: ISO 14175 M21 (Ar-CO2 82-18)
Process gas flow: 18 l/min
Substrate material: Mild steel (S235)
Wire material: EN ISO 14341-A (2011) G42 4M21 3Si1
Wire diameter: 1.2 mm
Wire feed speed: 3.4 m/min

trainings_data.csv is acquired during the welding of a slope with an initial CTWD of 5 mm and a end CTWD of 30 mm.
eval_slope.csv is a repetion of the set-up used for trainings_data.csv.
eval_constant.csv uses a constant CTWD of 10 mm.
eval_lower_wire_feed.csv uses a reduced wire feed of 2.5 m/min.

Description of the columns of the *.csv-files

t time in seconds

U voltage in volt

I current in ampere

CTWD Contact-Tube-to-Working-Distance in mm

Acknowledgement

Funded by the Ministry for Science and Culture of Lower Saxony (MWK) – School for Additive Manufacturing SAM.

Data and Resources

All resource dataZIP
Explore
- More information
- Go to resource
trainings_data.csv.csv
"trainings_data.csv" is acquired during the welding of a slope with an...
Explore
- More information
- Go to resource
eval_constant.csv.csv
"eval_constant.csv" uses a constant CTWD of 10 mm
Explore
- More information
- Go to resource
eval_slope.csv.csv
"eval_slope.csv" is a repetion of the set-up used for "trainings_data.csv".
Explore
- More information
- Go to resource
eval_lower_wire_feed.csv.csv
"eval_lower_wire_feed.csv" uses a reduced wire feed of 2.5 m/min
Explore
- More information
- Go to resource

Cite this as

Lennart Vincent Hölscher; Hans Jürgen Maier; Thomas Hassel (2021). Dataset: Contact-Tube-to-Working-Distance slopes with Gas-Metal-Arc-Welding. https://doi.org/10.25835/0011019

DOI retrieved: September 21, 2021

Additional Info

Field	Value
Imported on	October 14, 2021
Last update	October 14, 2021
License	CC-BY-SA-3.0
Source	https://data.uni-hannover.de/dataset/lennart-holscher
Version	1.0
Author	Lennart Vincent Hölscher; Hans Jürgen Maier; Thomas Hassel
Author Email	Lennart Vincent Hölscher; Hans Jürgen Maier; Thomas Hassel
Maintainer	Lennart Hölscher
Maintainer Email	Lennart Hölscher
Source Creation	21 September, 2021, 13:09 PM (UTC+0000)
Source Modified	21 September, 2021, 13:49 PM (UTC+0000)
CTWD	Contact-Tube-to-Working-Distance
I	current in ampere
U	voltage in volt
t	time in seconds