Contact-Tube-to-Working-Distance slopes with Gas-Metal-Arc-Welding

Voltage and current signal during Gas-Metal-Arc-Welding. Measurement Data acquiered using National Instruments USB-6361. Current was converted using a "Chauvin Arnoux PAC22".
Welding power source: Carl Cloos GLC 303 PA/3
Welding torch: Abicor Binzel ROBO WH W 500
Welding speed: 0.3 m/min
Process gas: ISO 14175 M21 (Ar-CO2 82-18)
Process gas flow: 18 l/min
Substrate material: Mild steel (S235)
Wire material: EN ISO 14341-A (2011) G42 4M21 3Si1
Wire diameter: 1.2 mm
Wire feed speed: 3.4 m/min

trainings_data.csv is acquired during the welding of a slope with an initial CTWD of 5 mm and a end CTWD of 30 mm.
eval_slope.csv is a repetion of the set-up used for trainings_data.csv.
eval_constant.csv uses a constant CTWD of 10 mm.
eval_lower_wire_feed.csv uses a reduced wire feed of 2.5 m/min.

Description of the columns of the *.csv-files

t time in seconds

U voltage in volt

I current in ampere

CTWD Contact-Tube-to-Working-Distance in mm

Acknowledgement

Funded by the Ministry for Science and Culture of Lower Saxony (MWK) – School for Additive Manufacturing SAM.

Data and Resources

Cite this as

Lennart Vincent Hölscher, Hans Jürgen Maier, Thomas Hassel (2021). Dataset: Contact-Tube-to-Working-Distance slopes with Gas-Metal-Arc-Welding. https://doi.org/10.25835/0011019

DOI retrieved: September 21, 2021

Additional Info

Field Value
Imported on October 14, 2021
Last update August 4, 2023
License CC-BY-SA-3.0
Source https://data.uni-hannover.de/dataset/lennart-holscher
Version 1.0
Author Lennart Vincent Hölscher
More Authors
Hans Jürgen Maier
Thomas Hassel
Author Email Lennart Vincent Hölscher
Maintainer Lennart Hölscher
Maintainer Email Lennart Hölscher
Source Creation 21 September, 2021, 13:09 PM (UTC+0000)
Source Modified 21 February, 2022, 13:12 PM (UTC+0000)
CTWD Contact-Tube-to-Working-Distance
I current in ampere
U voltage in volt
t time in seconds